The main function is as a car carport shelter. But could also serve to add value to the home display.
Carport is located on the outside of the home. Therefore, carport directly visible from the street. Attractive design makes the carport can be involved as an element that beautify the facade of the house. To make the carport, do not have to choose a complicated design. Quite simple, provided in accordance with the display home. Most importantly, this function should be maximum carport.
Here we show five examples of carport designs that you can apply at home.
1. Drifting with the cantilever
5.8 mx7 sized carport, 2m. 3mx5 roof size, 7m. Cantilever roof carport system makes memorable flight. Roof buffer only in the form of four steel rods. Each buffer was standing upright and is 1.8 m. The roof is made of steel frames. Forms the roof using a grid pattern, a wooden lattice. Later the wooden lattice will be filled with the kind of Mandevilla vines.
2. As a shade roof and balcony
Used is a cantilever construction. The main structure of the chassis in the form of eight concrete beams. The length of each beam is 3m, and arranged within 35cm. In the upper ranks of concrete blocks, wood resting area of 15.8 square meters of merbau. The top of the carport was right in front of a child’s bedroom door. From there the roof of the carport is accessed as a balcony. So in addition as a shade car, also serves as a balcony.
3. Simple roof retractable wire
The main supporting structure is only a piece of angle iron on the right side of the roof. As the amplifier used two steel wire mounted cross. Both ends of the wire anchored in the main building, and two other points in the front of the roof truss. Framework of the roof just a hollow steel roof 4cmx5cm.Struktur sized square like this simple impression on the building.
4. Black iron flat roof
Front roof structure has no buffer, so impressive flying. Instead of a buffer, used two steel wire measuring 12mm. The wires are tethered to the main building. Polycarbonate material is selected to close the hollow steel frame. To be unique, the framework was prepared with a grid pattern.
5. Simple structure attached
Aside from being a shade of vehicles, carport also serves as the entrance. Design a simple look of the structure. The front is supported by two concrete blocks. The back attaches to the main building. As the roof, wooden lattice mounted transversely. To be more sweet, there Alamanda, which allowed propagates to the roof.
Incoming search terms:
- desain cantilever carport
- carport designs
- cantilever carport plans
- cantilever carport roof design
- carport plans wooden
- carport with support post only on one side
- flat top double car carport plans
- wood cantilever carports
- wooden cantilever carport
Comments are closed.